Opening a web browser and entering http://192.168.1.1 into the address bar will grant you access to your Netgear router. Please login with admin and “password” as your password.
The alternative is to use the password and how to change the router login password Netgear when you first set up the router. If you’ve forgotten your router’s password, you can reset it by answering two security questions and providing the router’s serial number.
Let’s dive in.
Prerequisites for Logging Into Your Netgear Router
You should double-verify a few things before logging into your Netgear router. Please follow the steps below to access your Netgear router successfully.
Indicator of an Internet Connection
As a first step, make sure your Netgear router can access the web. Look at the indicator lights to see if everything is hooked up correctly. The “Internet” or “WAN” light should be on and bright if the connection is stable (not blinking).
Attempt troubleshooting if your Netgear login password change isn’t communicating with the web. Try switching between different cables and modems to see if it helps. If it doesn’t help, you should call your internet service provider.
If your Internet connection is reliable, you can proceed.
Link in Your System
Connecting to the network is a must for accessing the router’s administration interface on a Netgear device. The Netgear router can be secured by Ethernet cable or wirelessly.
While Ethernet is preferable for establishing a connection, wireless networks will function as long as you are in range. 
How to Login to Your Netgear Router Via the Internet
Logging into the administration panel of your Netgear router requires first ensuring that the router is connected to the Internet and that your computer is connected to the router’s network.
Just stick to these simple instructions, and you’ll be inside in no time.
Navigate to the browser’s network settings page.
Use a web browser to access your Netgear router’s administrative controls (Edge, Chrome, Firebox, Safari, etc.).
Enter http://192.168.1.1 into the address bar of your browser. Clicking here should bring up a Netgear Router login window requiring a username and password. But if nothing opens, it could be because your router uses a different IP address.
Following are the procedures you should take to determine your router’s IP address:
To access these settings on Mac OS X, open System Preferences, navigate to the Network pane, and click the Advanced button. Next, navigate to your browser’s “TCP/IP” tab, and under the heading “Router,” copy the IP address displayed.
Launch the Command Prompt and enter “IPCONFIG” to configure your system if you’re using Windows. Next to “Default Gateway,” you’ll see your router’s IP address.
Enter your credentials and log in
To begin, please log in by selecting “admin” as the username and entering your password in the password area. Your wireless network password is different from this. The Netgear router login changed the password,” so use that.
One of the steps in setting up a new Netgear router is using the Nighthawk app to generate a unique password for the router’s administrative interface. I know I immediately forgot my password after creating it.
However, the software generates two security questions you can answer if you forget your password. You will need to reset your Netgear router if you have forgotten the answers to its security questions.
However, doing so will wipe out your network’s SSID, password, and any user-specific settings you may have made.
If you’ve never used the Nighthawk app to configure your router, the default password for the management interface is “password.”
Navigate to the Admin Panel
The Netgear router’s administration panel will open once the necessary credentials have been entered. The control panel has two levels of settings: basic and advanced.
App-Based Networking with the Netgear Nighthawk Router
The Netgear Nighthawk app for iOS and Android devices allows you to access your router from anywhere and a web browser. You must use this software to install your Netgear Nighthawk router for the first time.
Not all of the options in the browser’s settings menu are accessible. The app, however, makes it simple to view “Vulnerability reports” for recently added gadgets and monitor connection speeds, guest networks, data usage, and control connected devices.
The “Anywhere Access” feature of your Netgear router may be configured from within the app, and you can also use it to reset your router.
The Settings That Can Be Modified On A Netgear Router
Once you’ve logged into the administration page of your Netgear router, you’ll have access to a wide variety of options. A few settings are listed below.
You may access and modify the following settings in the Basic section:
The Internet connection status is shown for your perusal. The WAN setting, IP address, DNS, and IPv6 support can all be adjusted here (see our IPv4 vs. IPv6 guide for details).
Modify your network’s SSID and password, and set up the 2.4 and 5 GHz channels. Every month or so, you should change your Netgear router login password to keep it fresh and secure.
View and disable all currently attached devices.
If your router has a USB port, you can configure ReadySHARE to use it. Prepare USB network storage for local and cloud-based share access. 
To ensure the safety of your guests, set up a separate network just for them with its password.